FOS-5112
8 x 100/1000Base-X SFP + 4 x 1/10GBase-R SFP+ Managed Fiber Access Switch
FOS-5112 is a high-density Layer 2 access switch equipped with 8 x dual-speed SFP slots and 4 x 1/10Gbps SFP+ uplink ports. All SFP slots can accommodate a wide range of SFP transceivers including single-mode, WDM transceivers. FOS-5112 has sufficient functionalities for service providers and enterprises who plan to implement FTTX or Metro Ethernet networks, enabling easy operation and deployment of service.
Environmental Condition Operation: 0˚C ~ 50˚C
Storage: -20˚C ~ 60˚C
Humidity: 5% ~ 90%, Non-condensing
Dimension Size: 210 x 235 x 44 mm (W x D x H)
Weight: 1.8kg
Features
FOS-5112 delivers wire-speed throughput for data, voice, and IPTV services, using non-blocking 96Gbps switching fabric. FOS-5112 could support AC or DC power input for different environments.
10G
Equipped with 10G data transmission capacity designed to fulfill the ever-increasing demand for higher bandwidth which is essential for traditional Internet service and premium service alike
DHCP Auto Provisioning
Automatically upgrades the firmware and configuration from DHCP server to save maintenance cost
Multicast VLAN Registration
Reduce the bandwidth required to distribute IPTV multicast streams by means of sharing single traffic across different VLANs
Loop Detection
Automatically prevent the switching loops that cause network congestion and failures, and keep your service steadily running as planned
Dual Rate Fiber
Automatically sense and adjust the fiber speed when changes are made in the network environment, and so facilitate a longer lifespan of the product
Intelligent Diagnostics
Allow system operational monitoring in real-time, and instantly fault-identify SFF-8472-specification-compatible optical modules according to user-defined threshold parameters
Power Down Trap
Notify NOC when power is shut off and so save the cost of deploying human resources for troubleshooting
IPv4/IPv6 Dual Stack
Able to run IPv4 and IPv6 in parallel and be interoperable with other IPv4 / IPv6 / dual-stacked devices, which enables IPv6 management, IPv6 packet forwarding, and MLD v1/v2 Snooping
Fanless Design
Designed without a built-in fan which oftentimes results in constant annoying buzzing sounds. The feature prevents the harmful effects of a disruptive environment
Dual Image
Safeguard against permanent system crash from firmware upgrade failures
Flexible IPTV Deployment
Designed with rich functions in facilitating multimedia streaming and providing a stable IPTV service with high quality
Specification
Interface
- SFP Slot:
8 x 100/1000Base-X SFP - SFP+ Slot:
4 x 10GBase-SR/LR SFP+
Compatible with 1000Base-X transceiver - Console Port:
1 x RS-232 to RJ45 serial port - Terminal Block
1 x Digital Input (Dry contact)
LED
- Power
- Status
- COM
- Speed/Link/Act
Power Requirement
- Input AC: 100V ~ 240V 50/60Hz
- Input DC: 48V (Range: 44 ~ 52V)
- Max. Power Consumption: 20W (68BTU/h)
Hardware
- MAC Address Table: 16K
- Non-blocking Switching
- Fabric: 96Gbps
- Throughput @ 64Bytes: 71.4Mpps
- Packet Buffer: 12Mbit
- Jumbo Frame: 12K Bytes
- Store and Forward Switching Mechanism
Environmental Condition
- Operation: 0˚C ~ 50˚C
- Storage: -20˚C ~ 60˚C
- Humidity: 5% ~ 90%, Non-condensing
Dimension & Weight
- Size: 210 x 235 x 44mm (W x D x H)
- Weight: 1.8kg (with Rack ear)
Topology
Model
Model | 1G Fiber Port | 10G Fiber Port | Power Source | ||||
Speed | Type | Port | Speed | Type | Port | ||
FOS-5112-1A | 100/1000 | SFP | 8 | 1/10 | SFP+ | 4 | Fixed 1 Internal AC |
FOS-5112-1D | 100/1000 | SFP | 8 | 1/10 | SFP+ | 4 | Fixed 1 Internal DC |
Download
Model | Info | Version | Download file |
FOS-5112 | Datasheet | A01 | |
FOS-5112 | User's Manual (HW) | V1.0 | |
FOS-5112 | User's Manual (NMS) | V1.0 | |
FOS-5112 | Firmware | 1.00.0M | |
FOS-5112 | MIB-file | 1.00.0M | |
CTS 10G Last-Mile Broadband Solution Guide | CTS 10G Last-Mile Broadband Solution Guide | V1.1 |