IPC-3012-PoE++

1-Port SFP to 1-Port 60W RJ-45 Gigabit Industrial PoE++ Media Converter

1 Port 100/1000Mbps SFP Dual Rate and 1 Port 10/100/1000Base-T with 60W PoE++ Industrial Media Converter

Power Over Ethernet
Lightning Protection
Dual Rate Fiber
Plug-and-play
Power Redundancy
DOWNLOAD

Feature

  • - Provide 1 Gigabit RJ-45 Copper Port & 1 SFP Port 100FX or 1000BaseF(SX/LX/LH)
  • - Compatible with IEEE 802.3af/at PoE+ and up to 60W PoE++
  • - PoE Setting - Auto / Force Power
  • - Support 9K Jumbo Frames
  • - 6KV Surge Immunity on RJ-45 Copper Ports (K.21*)
  • - Dual Power Input (12~57VDC) & Built-in Power Booster
  • - Relay Output for Fault Alarm Notification (Power, Port)
  • - Alumiumn Housing
  • - Operating Temperature -40ºC~75ºC

 

*K.21 is better than IEC 61000-4-5 Level 3 and designed for PoE Application and Outdoor environment

 

6KV Surge Immunity (K.21)

To fully protect customers' deployed devices from surge damages, CTS adopts the test of K.21 surge protection enhanced level (6KV), with grounding installation, which approves resistibility of telecommunication equipment installed in customer premises if the surge comes from the Ethernet ports. Compared with IEC-61000-4-5, K.21 enhanced level test not only takes PoE applications into considerations, but assures way better to prevent voltage fluctuations and lightning for outdoor indusrial PoE applications.

 

Application Diagram

SPECIFICATION

  • Interface
  • -TP Port
  • 1 x 10/100/1000Base-T RJ45
  • -F/O Port
  • 1 x 100/1000Base-X SFP
  • PoE
  • -1 x 60W PoE (RJ-45)
  • -Max. 60 Watts per port 
  • Compatible with 802.3af/at
  • Standards
  • -IEEE 802.3 10Base-T
  • -IEEE 802.3u 100Base-TX
  • -IEEE 802.3ab 1000Base-T
  • -IEEE 802.3z 1000Base-X
  • -IEEE 802.3af Power over Ethernet
  • -IEEE 802.3at Power over Ethernet Enhancements
  • H/W Specification
  • -Store and Forward Switching Mechanism
  • -Auto-Negotiation in Fiber Port
  • -MDI/MDIX Auto-Crossover Supported
  • -Support Fault Alarm Notification (Power, Ports)
  • -Support Auto & Force Mode Configuration
  • -MAC Address Table : 2K
  • -Memory Buffer: 128 Bytes
  • -Relay Output
  • LED
  • P1, P2, ALM, TP, PoE, SFP
  • Ethernet Features
  • Jumbo Frames: 9K Bytes
  • Other Features
  • -DIP Switch Configuration
  • -Installation Type: DIN Rail Mounting
  • -PoE Configuration: Auto-Mode/ Force Power
  • Environmental Condition
  • -Operating Temperature: -40° ~ 75°C
  • -Storage Temperature: -40° ~ 85°C
  • -Humidity: 5% ~ 90%, non-condensing
  • Power Requirement
  • DC Input:
  • -Terminal Block x 1 with two power inputs
  • -Input Voltage: 12~57VDC
  • - Caution: Use 14AWG or better powering wire
  • -Power Consumption: 64.8W (Max.)
  • Dimension & Weight
  • -Size: 36x110x135 mm (WxDxH)
  • -Weight: 0.62Kg
  • EMC/Safety
  • FCC Class A, CE
  • IEC 61000-4-2/3/4/5/6
  • ITU-T K.21

MODEL

Model

Fiber Ports

TP Ports

Support Power Source

Speed

Type

Connector

Distance

Port

Speed

PoE++ Port

IPC-3012-PoE++

100/1000Mbps

SFP

-

-

1

10/100/1000 Mbps

1

Terminal Block x 1 with two power inputs