EPS-3128-SE-180W

28-Port Management Gigabit 180W PoE Ethernet Fiber Switch

24-Port 10/100/1000Base-T 802.3at PoE + 4 x Gigabit SFP/TP Combo Managed Switch

Power Over Ethernet
Lightning Protection
Loop Detection
PoE Scheduling
DHCP Auto Provisioning
Dual Rate Fiber
IPv4/IPv6 Dual Stack
Flexible IPTV Deployment
Dual Image
DOWNLOAD

SPECIFICATION

  • Interface
  • -TP Port:
  •   24 x 10/100/1000Base-T RJ-45 with 802.3at/af
      PoE injector function
  •   4 x 10/100/1000Base-T RJ-45
  • -SFP Slot:
  •   4 x 100/1000Base-X SFP shared with port-25 to
      port-28
  • -Console Port:
  •   1 x RS-232 to RJ-45 serial port
  • Standards
  • IEEE 802.3 10Base-T
  • IEEE 802.3u 100Base-TX/FX
  • IEEE 802.3ab 1000Base-T
  • IEEE 802.3z 1000Base-X
  • IEEE 802.3az EEE
  • IEEE 802.3x Flow Control
  • IEEE 802.3ad Link Aggregation (LACP)
  • IEEE 802.1ab LLDP
  • IEEE 802.1p Priority
  • IEEE 802.1q Tag VLAN
  • IEEE 802.1d STP
  • IEEE 802.1w RSTP
  • IEEE 802.1x Port based Network Access Control
  • IEEE 802.3af Power over Ethernet
  • IEEE 802.3at Power over Ethernet Plus
  • H/W Specification
  • MAC Address table: 8K
  • Non-blocking Switching Fabric: 56Gbps
  • Throughput @ 64Bytes: 41.6Mpps
  • Memory Buffer: 4.1Mbit
  • Jumbo Frame: 9K Bytes
  • Store and Forward Switching Mechanism
  • Auto-cross Over for MDI/MDIX in TP Ports
  • Auto-negotiation in TP Ports
  • Full/Half Duplex Mode Operation
  • PoE Power Output: max. 30W per port
  • Max. PoE Budget: 180W at 50˚C
  • Surge Protection in Ethernet port
  • LED
  • -Power, Status, COM, Speed/Link/Act, PoE
  • Forward/Filter Rate
  • 10M: 14,880/14,880pps
  • 100M: 148,800/148,800pps
  • 1000M: 1,488,000/1,488,000pps
  • Layer 2 Switch Features
  • VLAN
  • -IEEE 802.1q VLAN
  •   VLAN ID: 4094 IDs
  •   VLAN Concurrent Groups: 2K VLAN Groups
  • -Port Based VLAN
  • -VLAN Translation
  • -Q-in-Q Double tag with Configurable Ether
      Type
  • QoS
  • -QoS 802.1p CoS / DSCP
  • -Scheduling Algorithm
  •   Weighted Round Robin (WRR)
  •   Strict Priority Queuing (SPQ)
  • -QoS Priority Queues: 8 Queues
  • -802.1p P-bit & DSCP Remarking
  • -Port based rate limit (ingress/egress)
  • Network Redundancy
  • -IEEE 802.1d Spanning Tree Protocol (STP)
  • -IEEE 802.1w Rapid Spanning Tree Protocol
      (RSTP)
  • -IEEE 802.3ad Link Aggregation (LACP)
  • -Static Port Trunking
  • -Up to 14 Aggregation Groups, 8 Ports per
      Group
  • -Fast Redundancy Protocol
  •   Fast Ring v2
  •   Chain
  •   Up to 200 nodes and recovery time < 50ms
  • Multicast
  • -IGMP Snooping v1/v2/v3
  • -IGMP Fast Leave and Querier
  • -MLD v1/v2 Snooping
  • -MLD Querier
  • -IGMP/MLD Snooping Group: 512/128 Groups
  • -IP Multicast Filter with Segment and Profile
  • -Static Multicast Group
  • IPv6 Feature
  • -IPv6 over Ethernet (RFC 2464)
  • -IPv6 Addressing Architecture (RFC 4291)
  • -IPv6 Dual Stack (RFC4213)
  • -ICMPv6 (RFC4884)
  • -Path MTU Discovery for IPv6 (RFC 1981)
  • -Neighbor Discovery (RFC4861)
  • -DHCPv6 Client
  • Layer 2 Protocol Tunneling
  • -CDP, LLDP, STP, VTP, LACP, PAgP & UDLD
  • Access Control List
  • -Physical port, Ether Type, VID, ToS/DSCP,
      Protocol Type, L4 Port and IP
  • -192 ACL entries
  • PoE Management
  • -PoE alarm threshold
  • -Per Port PoE Power On/Off
  • -Configurable PD Name
  • -Per Port PoE Output Priority
  • -PoE Scheduling
  • Security
  • -802.1x Port Base Access Control
  • -802.1x RADIUS Authentication
  • -802.1x TACACS+ Authentication
  • -802.1x MAC Authentication Bypass
  • -RADIUS Based VLAN Assignment
  • -DHCP Option 82 Relay Agent
  • -DHCP Option 82 with configurable circuit and
      Remote ID
  • -DHCP Snooping and DHCP server trust port
  • -IP Source Guard
  • -Port Isolation
  • -Storm Control
  •   Unknown Unicast/Unknown Multicast/
      Broadcast
  • -MAC Limiter
  • -Loop Detection
  • Management
  • -SNMP v1,v2c & v3/Web/Telnet/SSL/SSHv2/CLI
  • -Text Base CLI Configure file
  • -Port Configuration
  •   Speed/duplex/flow control/Description
  • -NTP with Daylight Saving Time
  • -Layer 2 Control Protocol filter
  • -Static MAC address Table
  • -LLDP
  • Maintenance
  • Diagnostic
  • -Port Mirror
  • -ICMP Ping
  • -Event log
  • -Syslog
  • -SFP SFF-8472 DDMI monitor
  • -CPU
  •   Temperature/Utilization
  • -Memory Statistics
  • Upgrade/Restore
  • -Firmware Upgrade/Downgrade
  •   HTTP/SSL/FTP/TFTP
  •   DHCP Auto-provision via DHCP option 60/43
  • -Configuration Upload/Backup
  •   HTTP/SSL/FTP/TFTP
  •   DHCP Auto-provision via DHCP option 60/43
  • Power Requirement
  • Input AC:100V-240V 50/60Hz
  • Power Consumption (Max.): 200W
  • Max. PoE budge 180W
  • Environmental Condition
  • Operation: 0˚C ~ 50˚C
  • Storage: -20˚C ~ 60˚C
  • Humidity: 5%~90%, Non-condensing
  • Dimension & Weight
  • Size: 440 x 230 x 44 mm (W x D x H)
  • Weight: 3.5 Kg
  • EMC/Safety
  • FCC Class A, CE

MODEL

Model

Fiber Ports

TP Ports

Support Power Source

Speed

Type

Connector

Distance

Ports

Speed

Non-PoE

PoE

EPS-3128-SE-180W

100/1000Mbps

SFP

-

-

4 Combo

10/100/1000Mbps

4

24 x 802.3at/af

Fixed 1 Internal AC