HES-3106SFP-PLUS

HES-3106-PLUS

6-Port Management Gigabit Ethernet CPE Switch

Connection Technology System (CTS) HES-3106-PLUS series is a CPE switch with 5-Port 10/100/1000Base-T RJ-45 with 1-Port 100/1000Base-X fiber, and is housed with an eye-catching pearl-white case. It supports conversion between 10/100/1000Base-T and 100/1000Base-X network. Also, it is fully compliant with IEEE 802.3, 802.3u, 802.3ab, and 802.3z standards. The operation status can be monitored through the comprehensive LED display.

Environmental Condition Operation: 0˚C ~ 50˚C 
Storage: -20˚C ~ 60˚C
Humidity: 5% ~ 90%, Non-condensing 

Dimension Size: 180 x 130 x 30 mm (W x D x H)
Weight: 0.6 Kg

Features

HES-3106-PLUS series provides user-friendly but advanced IPv4/IPv6 management interface and abundant L2 switching functions. It is the best investment for businesses and SOHOs expanding or upgrading their network infrastructure with cost-effective and high-speed for FTTX solution.

Loop Detection

Automatically prevent the switching loops that cause network congestion and failures, and keep your service steadily running as planned

DHCP Auto Provisioning

Automatically upgrades the firmware and configuration from DHCP server to save maintenance cost

Power Down Trap

Notify NOC when power is shut off and so save the cost of deploying human resources for troubleshooting

Dual Rate Fiber

Automatically sense and adjust the fiber speed when changes are made in the network environment, and so facilitate a longer lifespan of the product

Flexible IPTV Deployment

Designed with rich functions in facilitating multimedia streaming and provides a stable IPTV service with high quality

IPv4/IPv6 Dual Stack

Able to run IPv4 and IPv6 in parallel and be interoperable with other IPv4 / IPv6 / dual-stacked devices, which enables IPv6 management, IPv6 packet forwarding, and MLD v1/v2 Snooping

iProbe

Advanced diagnostic functionality encompassing IPTV monitoring, end-user device emulation, and cable testing, altogether makes troubleshooting and management easier than ever
* Supported on HES-3106-PLUS/HES-3106B only

IPTV Probe

Monitor the IPTV traffic running in your network and make sure that end-users are receiving signals as expected

Fast and Secured Installation

Manage and secure the fiber cable/connector with a management tray, and hence simplify a greenfield deployment

Specification

Interface

  • TP Port:
    5 x 10/100/1000Base-T RJ-45
  • F/O Port:
    1 x 100/1000Base-X F/O
  • CATV RF Receiver Port*:
    – 1 x CATV fiber optic input
    – 1 x NTSC/PAL CATV coaxial output

LED

  • Power
  • LAN
  • WAN
  • Status

Power Requirement

  • External Power adaptor
  • Input AC: 100V~240V 50/60Hz
  • Output DC Rating: 12V/1.5A
  • Power Consumption
    – AC Side: 5.3W (MAX.)
    – DC Side: 4.2W (MAX.)

Hardware

  • MAC Address table: 2K
  • Non-blocking Switching Fabric: 12Gbps
  • Throughput @ 64Bytes: 8.9Mpps
  • Memory Buffer: 1Mbit
  • Jumbo Frame: 9K Bytes
  • Store and Forward Switching Mechanism
  • Auto-cross Over for MDI/MDIX in TP Ports
  • Auto-negotiation in TP Ports
  • Full/Half Duplex Mode Operation

Environmental Condition

  • Operation: 0˚C ~ 50˚C
  • Storage: -20˚C ~ 60˚C
  • Humidity: 5% ~ 90%, Non-condensing

Dimension & Weight

  • Size: 180 x 130 x 30mm (W x D x H)
  • Size with Cable Tray**: 180 x 180 x 42mm (W x D x H)
  • Weight: 0.6 Kg

* Only RF model supports CATV RF receiver port
** HES-FCT-S is Fiber Cable Tray Accessory for HES series

Model

Model

Fiber Port

TP Port

Power Source

Speed
(Mbps)

Type

Port

Speed
(Mbps)

Port

HES-3106SFP-PLUS-DR

100/1000

SFP

1

10/100/1000

5

External power adapter

Download

Model

Info

Version

Download file

HES-3106-PLUS

Datasheet

A03

HES-3106-PLUS

User's Manual (HW)

V0.92

HES-3106-PLUS

User's Manual (NMS)

V0.92