Search Product :  
Login in  | Contact Us  | 2011 Catalogue  | usa  | sw
FAQ
RMA Request
Tech Support Request
Service Program
 
Home > Support > FAQ
  FAQ
 
Please choose Category : 
Please choose Type : 
Please choose model : 
CVT-100 access method is CSMA/CD?
Yes, it is
 
Does ESH-2109 support FW auto upgrade?
Yes， we support it
 
The ISP VLAN Explanation
ISP port is a port which like as a tagging port
 
Does the FOS-3126Plus support RFC 3580 ?
Yes. We support RFC3580 (802.1x+Radius client)
 
Is the maximum packet of CIII-2512 achieved 1518?
No， it MTU is 1784byte.
 
Does SWH-3114 FW support a redundant configuration?
SWH-3114/3614 didn’t supports the fiber redundant feature
 
Does the CVT-100BTFT accepts FTP RJ45 connector?
Yes，CVT-100BTFT Support FTP RJ45
 
VRG-21412-PLUS uploaded the last F/W version onto the device then the device do not connect to any pc
VRG-21412-PLUS upgrades its firmware version then the configuration will be reset to the factory default setting.
 
Is CIII-2512 max packet to 9K?
100Mb switch chipset only supports the MTU to 1522byte only
 
VRG-21412+ RF Priority:DSCP priority support
Yes，ToS Priority is DSCP priority.
 
VRG-21412+ RF Data:PAT (Port Address Translation)
Yes
 
VRG-21412+ RF Data:NAT (Static NAT by IP and/or Port)
Yes
 
VRG-21412+ RF Application:Need VOIP go through VLAN 400
NO，VOIP does　not support VLAN crown
 
VRG-21412-Plus Sample of Cisco part number?
CISCO Catalyst 3550 and 3560
 
Fw-upgrade of some ESH-2108 ，the workes just fine for all unit except one.
“TIME OUT” shown during the update step that mean the DUT can not make communicates with FILE SERVER FW update.
 
Does your CVT Converter Models support Link Down through the Converter?
Yes， CVT series products support “LINK ALARM” which feature is alike as the link down through.
 
VRG-21412+ RF Voice:Codec G729 and G711 support.
Yes
 
Does the CVT-100BTFT accept the FTP RJ45 connector?
Yes, the CVT-100BTFT supports the FTP RJ45.
 
Does it comply to EN50121AEN50238AE61000-6-4AEN61000-6-2? We need some certifications to prove it?
The CVT-100 supports E6100-4-6 and EN6100-6-1 only.
 
Does the CVT-100BTFT accept the FTP RJ45 connector?
Yes, the CVT-100BTFT supports the FTP RJ45.
 
Can it strore in -40 or not?
We can't guarantee that but -30 will be OK.
 
DIP 3 & 4 have opposite settings between the old and new version. How we can distinguish them?
DIP 4 is Link Alarm. And in all versions, ON is enable and OFF is disable. The default setting is OFF.
 
Can it work with the 100gm/140 gm fiber cable?
Yes, the CVT-100 supports the 100gm/140 gm fiber cable.
 
Can it be manipulated by the SNMP service?
No, the CVT-100 doesn't support the SNMP service.
 
Can Link alarm work when the link type is A/N to 100/F or 100/F to A/N?
Yes, it can work.
 
Transfer rate?
The data transfer rate of the CVT-100 is 100Mb. And the throughput is 71.4Mbps
 
The access method is CSMA/CD?
Yes, it is.
 
Can the fiber spcification be used in 50/125um & 62.5/125um?
50/125->-4.6dBm, 62.5/125 -> -4.3dBm. Since the differential is only about 0.3, we suggest you keeping the original value.
 
Can the CVT-100 be mounted on the wall?
Yes, the CVT-100 has 4 holes dimension on the back of the CVT box.
 
 
 
© COPYRIGHT 2009 CONNECTION TECHNOLOGY SYSTEMS CO., LTD. All rights reserved.